Loading...

Brother MFC J6520DW won't turn on

. 52 Videos
Subscribe
22,548,145
2,729,347 views
95% 39,852 852

About :

READ THIS: There are confirmed solutions for the issue outlined in the video in the comments. read comments bellow.

This video does not show the solution, merely the problem. I recorded it to send it to the support team at Brother. I ended up exchanging the printer under warranty where I bought the printer from.

baixar call of duty black ops pc

minecraft 1.7.4 pirata

servidores minecraft 1.8 pirata minigames

atualizar firmware technicolor td5136v2

meu corsa esta falhando quando acelero

jogos 4shared

tv lg 39lb5600 tem wifi

asas de pegasus ragnarok

como amansar calopsita adulta

mod dayz minecraft 1.7.10

Tags :

Google AdSense
728 x 90

Similar Videos:

NEW TECHNOLOGIES THAT WILL BLOW YOUR MIND
15:19
8,241,542 views. 93%
Ink Cartridges Are A Scam
15:19
8,241,542 views. 93%
MIND BLOWING LATEST ROAD TECHNOLOGIES
15:19
8,241,542 views. 93%
50 Comments

    Popular Comments:

Piotr . K - LUTON . 2019-01-27
Disconnecting the Power Cable, waiting 30 seconds, reconnecting and holding down the on/off button until initialisation was complete, worked for me the first time.

tx
121 2 . Reply
Anouk Ahlborn . 2019-01-07
I have the same problems, exactly same model.
121 2 . Reply
Stephen Williams . 2018-11-14
There isn't any power on my ,is there a fuse inside...?
121 2 . Reply
Fábio Paraguassú . 2018-11-09
1. Unplug the printer for at least 10 minutes.

2. Take out all printer trays.
3. Hold down the on/off button
4. Plug in the power (no success).
121 2 . Reply
Stephen Williams . 2018-11-03
Mine dousnt do anything ....?
121 2 . Reply
وصفة في دقيقة . 2018-09-25
Please solution
121 2 . Reply
Albert Sierra . 2018-09-18
This printer is designed to be always on, think that it is of the Professional Series and can be accessed via network by an entire office. It is foolish to turn it off, the procedure to turn it on, which is described in other comments, unplug it for about 30 seconds and plug it back in, pressing the power button at the same time, it works, in fact it is the procedure they told you when you call the Hotline of Brother.
121 2 . Reply
Treinador Sportinguista . 2018-07-24
omg... you rock ;)
121 2 . Reply
Stephen Jarrett . 2018-06-11
simple - remove the main plug from the rear and wait for 60 seconds and press and hold the on/off button on the front and do not take your finger off this button for at least 20-30 seconds whilst you replace the main plug and until a master reboot is done - all you have to do then is change the clock and date - it should remember your wifi details but you may have to reconnect to your router but I did not!!
121 2 . Reply
Ty Gallow . 2018-05-27
Thanks!!! Had the exact same problem and holding in the power button on start up worked!
121 2 . Reply
johnpa2006 . 2018-05-12
This just worked for my printer, its barely used and it started to not turn on. Followed these steps and it came back. Hooked up a separate power strip so I can unplug it without having to crawl under the desk. So I turn it off from the power strip (its the only thing on that strip), then tap power on printer a few times while strip is off. Then while holding the power button on printer, I hit the button on the strip. Each time that brings this printer back to life.
121 2 . Reply
TheNmg101 . 2018-05-03
The same thing happened to my MFC-J4420DW. I did what David Calow said in the comments and the printer finally turned back on!
121 2 . Reply
Graham M . 2018-04-16
You clever people. What would we ever do without you.Same problem with my MFC-j6920DW printer. Fixed the problem fine. Never look at the "Troubleshooting" in the book - straight to Youtube.Thank you.
121 2 . Reply
Redrum Head . 2018-03-31
the solutions didnt work for me but before i smashed mine i found this site with a solutions that worked https://www.ifixit.com/Answers/View/335551/Shutting+down+when+plugged+in.

basically all you do is -

turn the fucker off for a while ...maybe 30 s
remove the fuckin paper trays
turn the fucker back on and wait for it to boot up (- no need to hold the power - it should just boot up "naturally" on its own...the way it was supposed to when we bought the asshole )
when it's finished booting up just insert the fuckin paper trays back in

Magic!

she's should be apples .....no more shutting down on its own. It even recognised my media card...Wow and fuckin ridiculous

Fucken hell what a stupid bastard of a machine...as usual no support from those time wasting pricks in corporate land

thanks all
121 2 . Reply
Redrum Head . 2018-03-31
should have called these units brother fuckers......piece of shit bastards!
121 2 . Reply
STUDIO LIVE . 2018-02-05
this happened to me today. just unplug for 3-4 minutes and leave it. then put plug back on and then it will turn on with the all function disabled error. then just leave it for 3-4 minutes then i think i pressed power button on front pannel and it started working again. key is just let it rest
121 2 . Reply
Chris Ellis . 2018-01-21
Thanks - worked just as you suggested.
121 2 . Reply
El Dorado Iron Works Inc. . 2018-01-19
Thanks . It worked for me too.
121 2 . Reply
JO RO . 2018-01-08
This worked for me. Great Idea. Thanks
121 2 . Reply
JL Laine . 2018-01-04
unplug - remove the paper trays - wait 30+ seconds - plug in and watch it boot and complain about missing paper trays - wait another 10-15 sec and then reinsert the paper trays. it came up with the clock reset, checking if I need to reconfigure LAN/WiFI settings....
121 2 . Reply
Michael Melton . 2017-11-26
Just saved me $300+ dollars. I was just going to go out and buy a new printer when I watched this and read these comments. Worked the first time for me.
121 2 . Reply
Jeff Boivin . 2017-11-22
6. While holding down Power Key, plug your machine back into the electrical outlet. Hold Power Key for 20 seconds after plugging your machine back in.
121 2 . Reply
Tony Tsui . 2017-11-21
I have a Brother MFC-L2700DW printer and have the problem of it not turning on. The printer won't turn on again after it shuts down (pressing the power button to turn it off). I have to unplug the power cable, wait for about a minute, then plug it back in and the printer turns back on.
121 2 . Reply
Nadir Rahmoun . 2017-09-08
please help : error 46 persist even after i made a reset of number of wipes. (excuse my bad english) what can i do ? pleeeeaaase help me
121 2 . Reply
Koffi Banan . 2017-09-02
Doesn't turn on after standby.

This seems to be a common problem on many printers of this series, but the solutions presented here are just a workaround. You have to go and unplug your printer each time you want to use it. Quite silly for a WiFi printer...

I've dug a bit deeper; the problem lies in a supercapacitor 5,5V 0,22F on the main pcb motherboard. It's unable to keep a charge and therefore the printer fails to come out of standby.

You can get to the pcb by removing 9 screws, unplugging a few connectors and a bit of fiddling. Go in from the top, remove the scannerbed and work your way down. The supercap itself is a throughhole part that's easily replaceable with a standard soldering iron and costs around €2.

Good luck fixing this chinese piece of shit and getting your money's worth out of it!!
121 2 . Reply
Rosalie Schott . 2017-08-31
mine wont work
121 2 . Reply
simon taylor . 2017-08-29
same problem. unbelievable never had such a stupid problem with a printer. it is that close to being thrown out of thw window, do brother have a proper resolution for this? mine is just over a year old and then started this problem after warranty period had ended, how convenient......
121 2 . Reply
Brin Hitchens . 2017-08-06
See David Calow's comments they work
121 2 . Reply
Robin Harman . 2017-07-27
Worked for me, many thanks
121 2 . Reply
Craig Krause . 2017-07-13
Awesome! Unplugged, plugged back in while pressing the power key. It started up, then went to shut down again, displayed something like "press power key to continue" whch I did a few times. It shut down and cycled back on and is now working!!! MFC-J6920DW
121 2 . Reply
Ricci Chang . 2017-05-30
Thanks a lot!  I was about to smash the printer:-)
121 2 . Reply
RDO 10 . 2017-05-12
gracias! thanks from Paraguay
121 2 . Reply
Crystal Young . 2017-05-01
it worked for me!
121 2 . Reply
haaksify . 2017-04-28
Unplug the power chord for 30 secs, hold down the power button while replugging the power cord. Dont release the power button before you are back at the main menu. IT WORKS!!!!
121 2 . Reply
Marcie Skilled Canines . 2017-03-04
.I have the MFC-J6720DW and it has NEVER worked properly. IT decides which tray it wants to use and makes you fill paper even if the other tray is full. Yes I have it on the correct setting. It is dead now. I'm going to try this fix but it is out of warranty and it cost me over $300.00. So what now - garbage and throw away all of the ink I have? I would NEVER purchase  anything that has Brother printed on it. I was just hoping to use it until I ran out of all of my ink cartridges and then go back to my old HP.Too bad they don't stand behind their products.
121 2 . Reply
Henning Nielsen . 2017-02-13
1. Remove power plug for 30 sec,
2. Remove both paper trays
3. Plug in power cable again while holding down the power button.
4. Wait for itto tell you it's missing the paper trays... and you're done.
121 2 . Reply
Keenan Suter . 2017-01-28
Worked well. Thanks for posting.
121 2 . Reply
Ms. Camille . 2017-01-27
it works😊
121 2 . Reply
adnan rashid . 2017-01-26
when you see this message. Press and hold power botton.
121 2 . Reply
Cari111111 . 2017-01-14
Thanks so much! Removing the paper tray worked for me!
121 2 . Reply
James Sto . 2017-01-12
remove paper trays, unplug, wait 30 seconds. Plug back in. once powered back on put paper trayz back in. worked great!
121 2 . Reply
SAS 76 . 2017-01-12
all you have do guys is remove the paper tray turn it back on put paper tray back in and it will.work again
121 2 . Reply
Jessica Lombard . 2017-01-09
Yes! It worked!! Unplug for a minute and remove paper tray. Hold power button and plug back in. While still holding power button listen for sound start up and as soon as you hear the sound, release power button. Machine screen will say paper tray...at this point put tray back in and presto!
121 2 . Reply
Shyn Liberato . 2017-01-09
My printer Brother DCP T300 wont power on... Any suggestions? Thanks
121 2 . Reply
Luckner Paul . 2016-12-29
Thank you so much, it works for me too.
121 2 . Reply
kingarthurscott . 2016-12-27
hmm.. now I have a different problem after the fix. the thing won't even switch on at all.
121 2 . Reply
sassysb1 . 2016-12-08
I had this problem tonight. Thank you David for posting the solution, it worked for me too!!!
121 2 . Reply
Richard Wilson . 2016-11-30
turn on fine :)but when we turn if of again it won't turn back on:( why is this. it will also print fine:)
121 2 . Reply
Derek Knight . 2016-11-30
Thanks!!! exact same problem, and great solution!!
121 2 . Reply
Matthias Loikasek . 2016-11-24
I had the same porblem with my MFC-J4420DW. A Brother technician changed a defect capacitor and now the printer is working as it should be. I looked him over the shoulder and made a guide how to replace the capacitor on ifixit.com (https://www.ifixit.com/Guide/Brother+MFC-J4420DW+Capacitor+Replacement/74271)
121 2 . Reply